Refine your search
Collections
Co-Authors
Journals
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z All
Saha, Sucharita
- Investigation on the Correlation between Surface Roughness and Acoustic Emission Characteristics in Turning Process
Abstract Views :238 |
PDF Views:0
Authors
Affiliations
1 Surface Engineering and Tribology Laboratory, CSIR-Central Mechanical Engineering Research Institute, Durgapur, IN
2 Material Processing and Microsystem Laboratory, CSIR-Central Mechanical Engineering Research Institute, Durgapur, IN
1 Surface Engineering and Tribology Laboratory, CSIR-Central Mechanical Engineering Research Institute, Durgapur, IN
2 Material Processing and Microsystem Laboratory, CSIR-Central Mechanical Engineering Research Institute, Durgapur, IN
Source
Manufacturing Technology Today, Vol 18, No 6 (2019), Pagination: 3-9Abstract
One of the most significant feature for monitoring in machining processes is tool wear. It has a direct influence on the quality of machined surfaces. In-order to maintain the product quality and to reduce material wastage, online tool wear monitoring has become a regular practice. With the progress in tool wear, surface roughness changes accordingly and this change can be used to assess the tool condition. However, it is difficult to measure the surface roughness online. It is well known that interaction of tool and workpiece results in high frequency stress waves known as Acoustic Emissions (AE), which can be used as an indirect online method to monitor the surface roughness and in-turn tool wear. The analysis of AE signals which received significant attention in structural and machine health monitoring opens wide opportunities to monitor the machining process. Hence, in the present work an attempt has been made to explore the correlation between the acoustic emission characteristics and workpiece surface roughness during the high speed turning operation using AISI 4340 alloy steel workpiece with the help of Zirconia Toughened Alumina (ZTA) tool on a lathe machine. Experiments has been designed as per Central Composite Design (CCD) of Response Surface Methodology (RSM) with varying 3 levels of 3 parameters such as cutting speed, feed rate and depth of cut. For each experiment, AE signals are acquired and surface roughness is measured using Surtronic 25 portable surface roughness meter. Analysis of variance (ANOVA) is used to study the effect of control parameters on output responses and a model is prepared using regression analysis. It is observed from the ANOVA analysis that feed rate and cutting speed have profound influence on surface roughness and RMS respectively. The optimum condition is found at Cutting speed of 300 m/min with feed rate of 0.12 mm/rev and depth of cut of 1.5 mm with 97.15% desirability for minimum surface roughness and nominal RMS value. From the parametric study, it is observed that AE characteristic (RMS) shows good correlation with surface roughness which can be used for further analysis in online monitoring of tool wear.Keywords
AE Characteristics, RMS, Surface Roughness, Tool Wear.References
- Gómez, MP and Hey, AM: Assessment of cutting tool condition by acoustic emission, vol. 1, 2012, 321–328.
- Amorim, HJ and Neto, A O K: Study of the Relationship between Tool Wear and Surface Finish in Turning with Carbide Tool, 'Adv. Mater. Res.', vol. 902, 2014, 95-100.
- Seeman, M; Ganesan, G; Karthikeyan, R and Velayudham, A: Study on tool wear and surface roughness in machining of particulate aluminum metal matrix composite-response surface methodology approach, 'Int. J. Adv. Manuf. Technol'., vol. 48, no. 5-8, 2010, 613-624.
- Teti, R; Jemielniak, K; O'Donnell, G; and Dornfeld, D: Advanced monitoring of machining operations, 'CIRP Ann.', vol. 59, no. 2, 2010, 717-739.
- Kurada, S and Bradley, C: A review of machine vision sensors for tool condition monitoring, 'Comput. Ind'., vol. 34, no. 1, Oct. 1997, 55-72.
- Cakan, A: Real-time monitoring of flank wear behavior of ceramic cutting tool in turning hardened steels, 'Int. J. Adv. Manuf. Technol.', vol. 52, no. 9-12, 2011, 897-903.
- Cook, NH: Tool wear sensors, 'Wear', vol. 62, no. 1, 1980, 49-57.
- Lunde, G and Anderson, PB: A study of the wear processes on cemented carbide cutting tool by a radioactive tracer technique, 'Int. J. Mach. Tool Des. Res.', vol. 10, no. 1, Mar. 1970, 79-93.
- Siddhpura, A and Paurobally, R: A review of flank wear prediction methods for tool condition monitoring in a turning process, 'Int. J. Adv. Manuf. Technol.', vol. 65, no. 1-4, 2013, 371-393.
- Dimla, DE and Lister, PM: On-line metal cutting tool condition monitoring, 'Int. J. Mach. Tools Manuf.', vol. 40, no. 5, 739-768, Apr. 2000.
- Ambhore, N; Kamble, D; Chinchanikar, S and Wayal, V: Tool condition monitoring system: A review, 'Mater. Today Proc.', vol. 2, no. 4-5, 2015, 3419-3428.
- Li, X: A brief review: Acoustic emission method for tool wear monitoring during turning,” Int. J. Mach. Tools Manuf., vol. 42, no. 2, 2002, 157-165.
- Nair, A and Cai, CS: Acoustic emission monitoring of bridges: Review and case studies, 'Eng. Struct.', vol. 32, no. 6, Jun, 2010, 1704-1714.
- Nor, NM: Structural health monitoring through acoustic emission, in Eco-Efficient Repair and Rehabilitation of Concrete Infrastructures, Elsevier, 2018, 123-146.
- Ferrari, G and Gómez, MP: Correlation Between Acoustic Emission , Thrust and Tool Wear in Drilling, 'Procedia Mater. Sci.', vol. 8, 2015, 693-701.
- Dirk Söffker and Sandra Rothe*: New Approaches for Supervision of Systems with Sliding Wear: Fundamental Problems and Experimental Results Using Different Approaches, 'Appl. Sci.', vol. 7, no. 8, 2017, 843.
- Hase, A; Wada, M; Koga, T; Mishina, H: The relationship between acoustic emission signals and cutting phenomena in turning process, 'Int. J. Adv. Manuf. Technol.', vol. 70, no. 5–8, 2014, 947-955.
- Kumar Singh, B; Roy, H; Mondal, B; and Roy, S S: Development and machinability evaluation of MgO doped Y-ZTA ceramic inserts for high-speed machining of steel Y-ZTA ceramic inserts for high-speed machining of steel,” Machining Science and Technology, Taylor & Francis, 1-15, 2018.
- Singh, BK; Mondal, B; Mandal, N: Machinability evaluation and desirability function optimization of turning parameters for Cr2O3 doped zirconia toughened alumina (Cr-ZTA) cutting insert in high speed machining of steel, 'Ceram. Int.', vol. 42, no. 2, 2016, 3338-3350.
- A Review on Short Pulse Generator Used for Micro Electric Discharge Machining
Abstract Views :295 |
PDF Views:0
Authors
Affiliations
1 CSIR- Central Mechanical Engineering Research Institute (CMERI), Durgapur, West Bengal, IN
2 Academy of Scientific and Innovative Research (AcSIR) Anusandhan Bhawan, New Delhi, IN
3 Central Manufacturing Technology Institute (CMTI), Bengaluru, Karnataka, IN
1 CSIR- Central Mechanical Engineering Research Institute (CMERI), Durgapur, West Bengal, IN
2 Academy of Scientific and Innovative Research (AcSIR) Anusandhan Bhawan, New Delhi, IN
3 Central Manufacturing Technology Institute (CMTI), Bengaluru, Karnataka, IN
Source
Manufacturing Technology Today, Vol 18, No 12 (2019), Pagination: 3-11Abstract
Micro-EDM is a promising noncontact micro machining process; where the precisely controlled electric spark occurred between the tiny electrodes and erodes the material from electrically conductive work piece. Application of this Micro EDM is rapidly growing in manufacturing of metal products irrespective of its hardness having geometric features in range of micrometer to nanometer scale. In order to ensure the material removal in the order of few cubic micrometers it is desirable to use a low energy, shorter pulsed discharges at very high frequency. In this study, the detailed literature review related to low energy and short pulsed power circuits to use in Micro-EDM process conditions has been carried out. The advantages and issues of obtaining such high frequency short pulsed low energy discharge have been critically studied to set the future directions for further investigation.Keywords
Micro EDM, Pulse Generator, RC Relaxation Circuit, Transistor Type Pulse Generator.References
- Ho, KH and Newman, ST: State of the art electrical discharge machining (EDM), 'Int. J. Mach. Tools Manuf.', vol. 43, no. 13, 2003, 1287-1300, .
- Mahendran, S; Devarajan, R; Nagarajan, T; Majdi, A: Mahendran et al. - 2010 - A Review of Micro-EDM, 'Proc. Int. Multi Conf. Eng. Comput. Sci.', vol. 2, 2010.
- Liu, HS and Tarng, YS: Monitoring of the electrical discharge machining process by abductive networks, 'Int. J. Adv. Manuf. Technol.', vol. 13, no. 4, 1997, 264–270
- Furutani, K; Enami, T and Mohri, N: Three-dimensional shaping by dot-matrix electrical discharge machining, 'Precis. Eng.', vol. 21, no. 2–3, 1997, 65–71.
- Ramasawmy, H; Blunt, L and Rajurkar, KP: Investigation of the relationship between the white layer thickness and 3D surface texture parameters in the die sinking EDM process, 'Precis. Eng.', vol. 29, no. 4, Oct. 2005, 479–490.
- Kung, KY; Horng, JT and Chiang, KT: Material removal rate and electrode wear ratio study on the powder mixed electrical discharge machining of cobalt-bonded tungsten carbide, 'Int. J. Adv. Manuf. Technol.', vol. 40, no. 1–2, Jan. 2009, 95–104.
- Yang, X; Guo, J; Chen, X; and Kunieda, M: Molecular dynamics simulation of the material removal mechanism in micro-EDM, 'Precis. Eng.', vol. 35, no. 1, Jan. 2011, 51–57.
- Puhan, D; Mahapatra, SS; Sahu, J and Das, L: A hybrid approach for multi-response optimization of non-conventional machining on AlSiCp MMC, 'Measurement', vol. 46, no. 9, Nov. 2013, 3581–3592.
- Zhou, M; Meng, X; Qin, J; Chen, Z and Lian, X: Building an EDM process model by an instrumental variable approach based on two interactive Kalman filters, 'Precis. Eng.', vol. 37, no. 1, Jan. 2013, 146–158.
- Teimouri, R and Baseri, H: Experimental study of rotary magnetic field-assisted dry EDM with ultrasonic vibration of workpiece, 'Int. J. Adv. Manuf. Technol.', vol. 67, no. 5–8, 1371–1384, Jul. 2013.
- Tong, H; Li, Y; Zhang, L and Li, B: Mechanism design and process control of micro EDM for drilling spray holes of diesel injector nozzles, 'Precis. Eng.', vol. 37, no. 1, 2013, 213–221.
- Tang, L; and Guo, YF: Electrical discharge precision machining parameters optimization investigation on S-03 special stainless steel, 'Int. J. Adv. Manuf. Technol.', vol. 70, no. 5–8, Feb. 2014, 1369–1376.
- Hourmand, M; Farahany, S; Sarhan, AAD and Noordin, MY: Investigating the electrical discharge machining (EDM) parameter effects on Al-Mg2Si metal matrix composite (MMC) for high material removal rate (MRR) and less EWR–RSM approach, 'Int. J. Adv. Manuf. Technol.', vol. 77, no. 5–8, Mar. 2015, 831–838.
- Kitamura, T; Kunieda, M and Abe, K: Observation of relationship between bubbles and discharge locations in EDM using transparent electrodes,” Precis. Eng., vol. 40, 2015, 26–32.
- Jahan, MP: Micro-Electrical Discharge Machining, 'Nontraditional Machining Processes', vol. 9781447151, J. P. Davim, Ed. London: Springer London, 2013, 111–151.
- Global Industry Analysts, 2018. [Online]. Available:https://www.strategyr.com. [Accessed: 10-Jul-2019].
- Gopalakannan, S and Senthilvelan, T: Application of response surface method on machining of Al–SiC nano-composites, 'Measurement', vol. 46, no. 8, Oct. 2013, 2705–2715.
- Puertas, I; Luis, CJ and Álvarez, L: Analysis of the influence of EDM parameters on surface quality, MRR and EW of WC–Co, 'J. Mater. Process. Technol.', vol. 153–154, Nov. 2004, 1026–1032.
- Keskin, Y; Halkacı, HS; Kizil, M: An experimental study for determination of the effects of machining parameters on surface roughness in electrical discharge machining (EDM), 'Int. J. Adv. Manuf. Technol.', vol. 28, no. 11–12, May 2006, 1118–1121.
- Sidhu, SS; Batish, A and Kumar, S: EDM of Metal Matrix Composite for Parameter Design Using Lexicographic Goal Programming, 'Mater. Manuf. Process.', vol. 28, no. 4, Apr. 2013, 495–500, .
- Yan, BH; Wang, CC; Liu, WD and Huang, FY: Machining Characteristics of Al 2 O 3 /6061Al Composite using Rotary EDM with a Disklike Electrode, 'Int. J. Adv. Manuf. Technol.', vol. 16, no. 5, Apr. 2000, 322–333.
- Mingbo, Q; Zhidong, L; Zongjun, T; Wei, W and Yinhui, H: Study of unidirectional conductivity on the electrical discharge machining of semiconductor crystals, 'Precis. Eng.', vol. 37, no. 4, Oct. 2013, 902–907.
- Zhao, Y; Kunieda, M and Abe, K: Multi-discharge EDM coring of single crystal SiC ingot by electrostatic induction feeding method, 'Precis. Eng.', vol. 41, Jul.2015, 24–31.
- Hourmand, M; Sarhan, AAD; Sayuti, M; Micro-electrode fabrication processes for micro-EDM drilling and milling: a state-of-the-art review, 'Int. J. Adv. Manuf. Technol.', vol. 91, no. 1–4, 2017, 1023– 1056.
- Uhlmann, E; Piltz, S and Doll, U: Machining of micro/miniature dies and moulds by electrical discharge machining - Recent development, 'J. Mater. Process. Technol.', vol. 167, no. 2–3, 488–493, 2005.
- Mohd Abbas, N; Solomon, DG and Fuad Bahari, M: A review on current research trends in electrical discharge machining (EDM), 'Int. J. Mach. Tools Manuf.', vol. 47, no. 7–8, 1214–1228, Jun. 2007.
- Huang, SH; Huang, FY and Yan, BH: Fracture strength analysis of micro WC-shaft manufactured by micro-electro-discharge machining, 'Int. J. Adv. Manuf.Technol.', vol. 26, no. 1–2, 2005, 68–77.
- Yu, ZY; Masuzawa, T and Fujino, M: Micro-EDM for Three-Dimensional Cavities - Development of Uniform Wear Method, 'CIRP Ann.', vol. 47, no. 1, 1998, 169–172.
- Lim, HS; Wong, YS; Rahman, M and Lee, Edwin MK: A study on the machining of high-aspect ratio micro-structures using micro-EDM,'J. Mater. Process. Technol.', vol. 140, no. 1-3 SPEC., 2003, 318–325.
- Jahan, MP; Rahman, M and Wong, YS: A review on the conventional and micro electrodischarge machining of tungsten carbide, 'Int. J. Mach. Tools Manuf.', vol. 51, no. 12, 837–858, 2011.
- Jahan, MP; Wong, YS and Rahman, M: A study on the fine-finish die-sinking micro-EDM of tungsten carbide using different electrode materials, 'J. Mater. Process. Technol.', vol. 209, no. 8, 2009, 3956–3967.
- Kuriachen, B; Mathew, J; N. I. T. Calicut, R Dean, and N. I. T. Calicut, spark radius modelling of micro electric discharge machining of TI-6AL-4V, in 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), 2014, no. AIMTDR, 342-1-342–4.
- Manikandan, R and Venkatesan, R: Optimizing the Machining Parameters of Micro-EDM for Inconel 718, 'J. Appl. Sci.', vol. 12, no. 10, Oct. 2012, 971–977.
- Son, S; Lim, H; Kumar, AS and Rahman, M: Influences of pulsed power condition on the machining properties in micro EDM, 'J. Mater. Process. Technol.', vol. 190, no. 1–3, 73–76.
- Jain, VK: Advanced (Non-traditional) Machining Processes, in Machining, London: Springer London, 299–327.
- Egashira, K and Mizutani, K: EDM at Low Open-Circuit Voltage, 'J. Japan Soc. Electr. Mach. Eng.', vol. 37, no. 85, 2011, 18–23.
- Wong, YS; Rahman, M; Lim, HS; Han, H and Ravi, N: Investigation of micro-EDM material removal characteristics using single RC-pulse discharges, 'J. Mater. Process. Technol.', vol. 140, no. 1-3 SPEC., 2003, 303–307.
- Masuzawa, M; Fujino, T: Micro pulse for EDM., in Autumn Conference. In: Proceedings of the Japan Society for Precision Engineering, 1980, 140–142.
- Hara, S and Nishioki, N: Ultra-high speed Discharge Control for Micro Electric Discharge Machining.
- Nakazawa, M; K., Han, F and Kunieda: Micro-EDM using transistor type pulse generator,” in Proceedings of the Japan Society for Precision Engineering Spring Conference, 2000, 259.
- He, G; Zhao, W; Guo, Y and Wang, Z; Development of nano second order pulse generator, Elec Disch Mach, 1999.
- Han, F; Chen, L; Yu, D and Zhou, X: Basic study on pulse generator for micro-EDM, 'Int. J. Adv. Manuf. Technol.', vol. 33, no. 5–6, 2007, 474–479.
- Han, F; Wachi, S and Kunieda, M: Improvement of machining characteristics of micro-EDM using transistor type isopulse generator and servo feed control, 'Precis. Eng.', vol. 28, no. 4, 378–385, 2004.
- Kunieda, M; Hayasaka, A; Yang, XD; Sano, S and Araie, I: Study on nano EDM using capacity coupled pulse generator, 'CIRP Ann. - Manuf. Technol.', vol.56, no. 1, 2007, 213–216.
- Yahagi, Y; Koyano, T; Kunieda, M and Yang, X: Micro drilling EDM with high rotation speed of tool electrode using the electrostatic induction feeding method, 'Procedia CIRP', vol. 1, no. 1, 2012, 162–165.
- Mohd Abbas, N and Kunieda, M: Improving Discharge Energy in Micro-EDM with Electrostatic Induction Feeding by Controlled Pulse Train Method, 'Int. J. Electr. Mach.', vol. 20, 2015, 45–51.
- Wang, F; Zhang, Y; Liu, G and Wang, Q: Improvement of processing quality based on VHF resonant micro-EDM pulse generator, 'Int. J. Adv. Manuf. Technol.', Jul. 2019.
- Mankowski, J and Kristiansen, M: A review of short pulse generator technology, 'IEEE Trans. Plasma Sci.', vol. 28, no. 1, 2000, 102–108
- Study on Material Removal Rate and Surface Roughness using Graphene as Dielectric Additives in Micro-Electric Discharge Machining
Abstract Views :100 |
PDF Views:0
Authors
Affiliations
1 CSIR-Central Mechanical Engineering Research Institute, Durgapur, West Bengal, IN
2 Central Manufacturing Technology Institute, Tumkur Road, Bangalore, Karnataka, IN
1 CSIR-Central Mechanical Engineering Research Institute, Durgapur, West Bengal, IN
2 Central Manufacturing Technology Institute, Tumkur Road, Bangalore, Karnataka, IN
Source
Manufacturing Technology Today, Vol 20, No 11-12 (2021), Pagination: 3-9Abstract
Micro-electric discharge machining is the most distinguished micro-manufacturing process for engineering micro-parts of different geometric features. The slow material removal rate owing to the low energy short-pulsed electric discharge is the major bottleneck of the process in batch scale production. This paper is an attempt to increase the material removal rate (MRR) and enhance the surface integrity in micro-EDM using graphene as an additive in dielectric liquid. Graphene sheets synthesized using Hummers method followed by reduction and subsequent heating was dispersed in hydrocarbon based dielectric liquid by ultrasonication at temperature near to the flash point. The INCONEL 718 workpiece electrode has been immersed in the graphene suspended dielectric medium where as tungsten carbide of diameter 200µm has been used as tool electrode. It has been found that the MRR increases by 47 % in terms of volume of material removed and the surface roughness reduces by 73 % for graphene additive based dielectric medium as compared with dielectric without additive.Keywords
Micro-EDM, MRR, Surface Roughness, Graphene, Dielectric Medium.References
- Behrens, A., & Ginzel, J. (2003). Neuro-fuzzy process control system for sinking EDM. Journal of Manufacturing Processes, 5(1), 33-39. https://doi.org/10.1016/S1526-6125(03)70038-3
- Chounde1, A. B., & Pawar, M. M. (2014). Study of Pulsed DC Power Supply Parameters for Micro-EDM. International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engg., 3(10), 12493-12495.
- Gangadhar, A., Shunmugam, M. S., & Philip, P. K. (1992). Pulse train studies in EDM with controlled pulse relaxation. International Journal of Machine Tools and Manufacture, 32(5):651–657.
- Jahan, M. P., Anwar, M. M., Wong, Y. S., & Rahman, M. (2009). Nanofinishing of hard materials using micro-electrodischarge machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223(9). https://doi.org/10.1243/09544054JEM1470
- Jahan, M. P., Rahman, M., & Wong, Y. S. (2010). Modelling and experimental investigation on the effect of nanopowder-mixed dielectric in micro-electrodischarge machining of tungsten carbide. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224(11), 1725–1739. https://doi.org/10.1243/09544054JEM1878
- Kibria, G., Sarkar, B. R., Pradhan, B. B., & Bhattacharyya, B. (2010). Comparative study of different dielectrics for micro-EDM performance during microhole machining of Ti-6Al-4V alloy. International Journal of Advanced Manufacturing Technology, 48(5), 557-570.
- Kolli, M., & Kumar, A. (2015). Effect of dielectric fluid with surfactant and graphite powder on Electrical Discharge Machining of titanium alloy using Taguchi method. Engineering Science and Technology, an International Journal, 18(4), 524-535. https://doi.org/10.1016/j.jestch.2015.03.009
- Kurnia, W., Tan, P. C., Yeo, S. H., & Tan, Q. P. (2009). Surface roughness model for micro electrical discharge machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223(3), 279-287. https://doi.org/10.1243/09544054JEM1188
- Mahendran. S., Devarajan. R., Nagarajan, T., & Majdi, A. (2010) - A Review of Micro-EDM. Proceedings of the International MultiConference of Engineers and Computer Scientists 2010 Vol II, IMECS 2010, March 17 - 19, 2010, Hong Kong
- Manikandan, R., & Venkatesan, R. (2012). Optimizing the machining parameters of micro EDM for Inconel 718. Journal of Applied Sciences, 12(10),971-977.
- Nagahanumaiah, Ramkumar, J., Glumac, N., Kapoor, S. G., & Devor, R. E. (2009). Characterization of plasma in micro-EDM discharge using optical spectroscopy. Journal of Manufacturing Processes, 11(2), 82-87. https://doi.org/10.1016/j.jmapro.2009.10.002
- Nguyen, M. D., Rahman, M., & Wong, Y. S. (2014). Development of a postprocessing approach for three-dimensional microelectrical discharge machining milling and application in simultaneous microelectrical discharge/ electrochemical milling. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 228(1), 62-73. https://doi.org/10.1177/0954405413486462
- Paul, G., Roy, S., Sarkar, S., Hanumaiah, N., & Mitra, S. (2013). Investigations on influence of process variables on crater dimensions in micro-EDM of γ-titanium aluminide alloy in dry and oil dielectric media. The International Journal of Advanced Manufacturing Technology, 65(5–8), 1009–1017. https://doi.org/10.1007/s00170-012-4235-8
- Pradhan, B. B., & Bhattacharyya, B. (2008). Improvement in microhole machining accuracy by polarity changing technique for microelectrode discharge machining on Ti-6Al-4V. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222(2), 163-173. https://doi.org/10.1243/09544054JEM959
- Pradhan, B. B., & Bhattacharyya, B. (2009). Modelling of micro-electrodischarge machining during machining of titanium alloy Ti-6Al-4V using response surface methodology and artificial neural network algorithm. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223(6), 683-693. https://doi.org/10.1243/09544054JEM1343
- Prakash, V., Kumar, P., Singh, P. K., Hussain, M., Das, A. K., & Chattopadhyaya, S. (2019). Micro-electrical discharge machining of difficult-to-machine materials: A review. In Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233(2), 339-370. https://doi.org/10.1177/0954405417718591
- Rajurkar K. P., & Yu Z. Y. (2000) 3D micro-EDM using CAD/CAM. CIRP Annals, 49(1), 127–130.
- Son, S. M., Lim, H. S., Kumar, A. S., & Rahman, M. (2007). Influences of pulsed power condition on the machining properties in micro EDM. Journal of Materials Processing Technology, 190(1–3), 73-76. https://doi.org/10.1016/j.jmatprotec.2007.03.108
- Talla, G., Gangopadhayay, S., & Biswas, C. K. (2017). State of the art in powder-mixed electric discharge machining: A review. In Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231(14), 2511-2526. https://doi.org/10.1177/0954405416634265
- Tan, P. C., & Yeo, S. H. (2011). Investigation of recast layers generated by a powder-mixed dielectric micro electrical discharge machining processg. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225(7), 1051-1062. https://doi.org/10.1177/2041297510393645
- Unune, D. R., & Mali, H. S. (2015). Current status and applications of hybrid micromachining processes: A review. In Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229(10), 1681-1693. https://doi.org/10.1177/0954405414546141
- Venkanna. M., & Chakraborty, A. K. (2014). Synthesis and characterizations of graphene oxide and reduced graphene oxide nanosheets. AIP Conf Proc., 1591, 574–576. https://doi.org/10.1063/1.4872679
- Wang, X., Liu, Z., Xue, R., Tian, Z., & Huang, Y. (2014). Research on the influence of dielectric characteristics on the EDM of titanium alloy. The International Journal of Advanced Manufacturing Technology, 72(5), 979-987.
- Yeo, S. H., Aligiri, E., Tan, P. C., & Zarepour, H. (2009). A new pulse discriminating system for Micro-EDM. Materials and Manufacturing Processes, 24(12), 1297-1305 https://doi.org/10.1080/10426910903130164
- Yeo, S. H., Tan, P. C., & Kurnia, W. (2007). Effects of powder additives suspended in dielectric on crater characteristics for micro electrical discharge machining. Journal of Micromechanics and Microengineering, 17(11). https://doi.org/10.1088/0960-1317/17/11/N01
- Yu, Z. Y., Masuzawa, T., & Fujino, M. (1998). Micro-EDM for three-dimensional cavities - Development of uniform wear method. CIRP Annals - Manufacturing Technology, 47(1). 169-172.https://doi.org/10.1016/s0007-8506(07)62810-8